Lutron Caséta Diva Smart Dimmer for ELV+ Lighting DVRF-5NE-LA - 250W LED - Neutral Required - Light Almond

Overview

The Lutron Caséta Diva Smart Dimmer (DVRF-5NE-LA) delivers precise dimming control for low-voltage fixtures including under-cabinet lights, track lighting, and other ELV applications. This phase-selectable dimmer features wireless control via Pico remotes and Caséta motion sensors using Lutron's patented Clear Connect RF Technology, which works through walls and floors for reliable whole-home control.

Key Features

• Smart Dimming for Low Voltage Fixtures: Works seamlessly with CFL/LED lights up to 250W, incandescent/halogen bulbs, ELV lights up to 500W, and MLV 400VA
• Flexible Installation: Single pole, 3-way, or multi-location control options
• Precise Touch Control: Slider provides easy, precise dimming with the touch of a finger—simply slide to your desired light level
• Soft-Glow Light Bar: Emits a soft white glow making it easy to locate and see the light level in a dimmed room
• Front Accessible Service Switch (FASS): Allows safe lamp replacement without removing the device from the wall
• Wireless Multi-Location Control: Works with Pico remote controls and Caséta motion sensors (devices must be within 60 ft line-of-sight or 30 ft through walls)
• Smart Home Integration: Pairs with Lutron Smart Hub or Smart Hub PRO for app control, scheduling, and integration with voice assistants (hub sold separately)
• Claro Accessory Switch Compatibility: Control from additional locations using wired Claro accessory switches or wireless Pico remotes
• Power Failure Memory: Returns to previous light level when power is restored
• Tested for Reliability: Withstands electrostatic discharge and surge voltages per IEC 61000-4-2 and C62.41-1991 standards

Technical Specifications

• Model: DVRF-5NE-LA (Phase Selectable Dimmer, Neutral Connection Required)
• Voltage: 120 V~ 50/60 Hz
• Load Capacity:
  • CFL/LED Lights: Up to 250W
  • Incandescent/Halogen/ELV Lights: Up to 500W
  • MLV: Up to 400 VA
  • Hi-lume 1% 2-Wire LED Drivers
• Wiring: Neutral wire required (standard in US homes built after 1973, Canada after 1980)
• Installation Depth: 1-gang U.S. wallbox, 3½ in (89 mm) depth recommended, 2¼ in (57 mm) minimum
• Operating Temperature: 32°F to 104°F (0°C to 40°C), 0% to 90% humidity, non-condensing, indoor use only
• Wallplate Compatibility: Uses Lutron Claro wallplates or designer-style wallplates (sold separately)
• Certifications: UL Listed, FCC compliant

Applications

• Under-cabinet lighting control
• Track lighting dimming
• Low-voltage architectural lighting
• Recessed LED fixtures with ELV drivers
• Residential and light commercial installations
• Multi-location control with 3-way wiring or wireless Pico remotes